Spa Equipment Systems

• Models to fit all applications, up to 2 pumps, 120V or 240V, up to 5.0 HP (20A)
• Units can control 120V air blowers, up to 2.0 HP (1.0 HP comes standard)
• Specific access switching, one air button for each controlled component
• “Heater On” light, indicates power to heater element
• “High Limit Tripped” light
• Heater mode selector switch
• All units have a 120V ozone receptacle
• Pressure switch protection of heater
• Spa side type selector switch (Regular or Digital Tecmark)

• All units conform to UL1563 and NEC 680-42 providing GFCI protection of all components
• All units have a 120V spa side receptacle
• “Glo-Is-Go” cords for load output diagnostics

WARRANTY:

• 24 month parts warranty. Units will be repaired and returned to the dealer. Irreparable units may be replaced to the dealer with similar product.
• 12 month labor warranty to qualified technicians

• (Purchaser will be responsible for return shipping)

• 1-Light Kit Includes Light Body Two Lenses And Bulb
• 1-Tailpiece 2”MBT x 2”S
• Air Buttons & 10 Ft. Tubing, 1 for each Switched Component Controlled
• Blower Cord for Units with Blower Circuit

• 1-Pump Inlet Union Assy. & Heater To Pump Union Assy.
• Operation Manual with Warranty Instructions
• Pump Cord
• Pump 2 Cord for Units with Pump 2 Circuit

• 120V Spa Side Controls can use any brand name 120V cord which uses the J & J Standard Plug.
• Ozone cord (18/3 x 48”) J & J Mini Plug (Part No. MOZML)

• Custom configurations of component HP and Voltages are available on request.
• Optional Pump 2 Circuit with (14/3 x 48”) J & J Mini Plug Part No. MPMPML3-GLO