I just bought a house that included a Heldor Enchanter spa and I don't have an owners manual. I have cleaned it out and want to get it set up. What, Exactly, do I need to do?? I need your help..... Please! Thanks!

With the power off fill the spa, (if you have a thermostat dial turn it to the lowest setting), when the water is above the jets turn the power on. Wait about 2-5 minutes for the spa do "do it's own thing" after the spa has pushed out any air bubbles and the pump seems to be working properly turn the temperature back up. The pump should engage in low speed. Place the cover back on the spa and wait for the temp to come up. Check for leaks over the next 24 hours. If the spa pumps, blowers, and heater function properly and you found no leaks, then you can start with the chemicals. If there is a problem with one of the functions post it and we can try to figure it out together. At ezhottubs.com on the home page there is an article about " How to use your chemical kit" Print that out for reference. The chemicals you will need to get started are: pH Balance, Metal Gon, Sodium Bromide ( you only need these when you do a fresh fill, Minimum of 3 times per year), test strips, Spa Up, Spa Down, Bromine, Oz, and Filter Clean. These chemicals will get you up and running for 6-12 months. It may seem like a lot but once you get the hang of it it really is easy to do.