Aquamod help

Posted: Tue Sep 05, 2006 8:28 pm   Post subject: Aquamod ... help me please!

Hi there....I recently acquired a new to me hot tub. It has a control switch set which states its an Aquamod...I have found replacement parts for this unit. However, I am looking for a manual. I have never had a tub before, and I can not figure out how to operate it. This one is certainly not new, but the old owner stated it works fine. The problem I am running up against, is when it is turned up to high, with the pump, (I am trying to get it to heat up), it automatically shuts off, then turns back on in a few minuets to low. It has been running for 2 days now, the weather is in the 90's, and I cant get it hotter than a bath tub bath. All of the jets, bubbles, etc appear to operate correctly. How do I operate this thing? And yes, I have asked the previous owner, but he isn't sure why its doing it, nor did he ever have directions to it either.....it was a hand me down to him also ...

First of all is the heat indicator light on the topside control coming on, if it is then you have a problem with your heater, also if it is not you have a problem with either the pressure switch or the topside control and the Aquamod topsides have been discontinued. The system should be replaced with new, regardless of condition, because of intermittent failures, also to find a manual will be impossible. That tubs parts have been discontinued for about 16 years. If you wish to replace the control system please call the office to find a equivalent to what you have.