EZ River
Hot Tubs

Posted: Sun Dec 10, 2006 4:26 pm   Post subject: lost power

I have a 2000 master spa legend series 6 person spa I turned the pump on the other day & lost all power to my control panel. Checked the GFI breaker it was not tripped, pulled side panel & checked power in the main control panel inside of spa, have power all the way to the circuit board, all fuses check ok. Is it possible that the main control panel up top went bad??

thanks Matt

It is possible that it is the top side control. First with the power breaker off unplug the pump. Turn the breaker back on if the spa runs them it is your pump. If it does not run then turn the breaker off and unplug all of the components, including taking the wire leads off of the heater. plug one item back in turn the power on. Repeat this until you have located the problem. If when all parts are unplugged and there is no functions then you will need to replace the PC board.