Follow The 3-Day A Week Program
The 3-Day A Week Program
Maintenance is the key to a clean and healthy spa. Once you’ve followed
the steps above to fill your spa, keep water clear and fresh with this
3-Day A Week Program.
 For
the purpose of explanation, we will use Monday, Wednesday, & Friday as the
treatment days for the 3-Day A Week Program. You could just as easily use
Tuesday, Thursday, and Saturday, or any three days of similar spacing.
Throughout the 3-Day A Week Program be sure to circulate
spa water for at least 15 minutes before adding another product.
Leisure Time’s 3-Day A Week
Program
| Day |
Follow this program if CHLORINE
is your residual or primary sanitizer: |
Follow this program if BROMINE is your residual or
primary sanitizer: |
| MONDAY |
Test pH and total alkalinity.
Adjust with Spa
Up or Spa Down if
necessary.
Test chlorine residual. Add Spa
56 Chlorinating Granules to maintain a 3-5 ppm chlorine residual
or 0.5 ppm residual when using the Spa Mineral Purifier.
Add Spa Bright & Clear
or, if using ozone, add Spa Scum Gon. |
Test pH and total alkalinity. Adjust Spa
Up or Spa Down if
necessary.
Test bromine residual. Check floater to ensure a good supply of
Brominating Tablets. Maintain
bromine residual of 3-5 ppm or 0.5 ppm residual when using the Spa
Mineral Purifier.
Add Spa Bright & Clear
or, if using ozone, add Spa Scum Gon. |
| WEDNESDAY |
Test pH and total alkalinity.
Adjust Spa
Up or Spa Down if
necessary.
Test chlorine residual. Add Spa
56 Chlorinating Granules to maintain a 3-5 ppm chlorine residual
or 0.5 ppm residual when using the Spa Mineral Purifier.
Add
Spa Defender. |
Test pH and total alkalinity. Adjust Spa
Up or Spa Down if
necessary.
Test bromine residual. Check floater to ensure a good supply of
Brominating Tablets. Maintain
bromine residual of 3-5 ppm or 0.5 ppm residual when using the Spa
Mineral Purifier.
Add
Spa Defender. |
| FRIDAY |
Test pH and total alkalinity.
Adjust Spa
Up or Spa Down if
necessary.
Test chlorine residual. Add Spa
56 Chlorinating Granules to maintain a 3-5 ppm chlorine residual
or 0.5 ppm residual when using the Spa Mineral Purifier.
Shock water with Renew or if
using ozone, OZ Tablets. |
Test pH and total alkalinity. Adjust Spa
Up or Spa Down if
necessary.
Test bromine residual. Check floater to ensure a good supply of
Brominating Tablets. Maintain
bromine residual of 3-5 ppm or 0.5 ppm residual when using the Spa
Mineral Purifier.
Shock water with Renew or if
using ozone, OZ Tablets. |
NOTE: This program is intended for a
residential spa with average use. It is not designed for public,
commercial or semi-public spas. If your spa is used by more than two
people more than 3 times per week, you should check and make chemical
additions more often than suggested.
To ensure water quality and keep the water easy to
balance, Leisure Time recommends draining your spa water at least every 3
months, or more often if the spa is used frequently.
IMPORTANT: Filter cycle should be run a
minimum of 6-8 hours per day.
During spa use, you may occasionally experience excess
foaming in your spa. Use Spa Foam
Down to immediately reduce foaming. Regular shock treatment with Renew
or OZ Tablets will help prevent excess
foam from reoccurring.
Previous Step (Step 3)
|
Get your hot tub ready for spring. Don't forget to order your
Boost
from Easy Times Hot Tubs. Only
$7.99 while supplies last!
View Cart
Hot Tub RSS Feed
|