|
|
Spa
56 Chlorinating Granules
Spa 56 Chlorinating Granules are specifically formulated for spas, this concentrated granular
chlorine effectively sanitizes and disinfects hot water.
Features:
- Maintains clean, clear, sanitized water
- EPA approved
|
 |
Advantage:
Spa 56 Chlorinating Granules provides a reliable and easy-to-use source of concentrated
chlorine.
Can be used as part of the Simple Spa CareŽ Program.
Applications:
Start-Up:
-
Chlorinate: Add 1/2 oz. of Spa 56 Chlorinating
Granules per 500 gallons of water
to the water prior to entering spa. Wait 5 minutes then check chlorine
residual. Residual chlorine must read between 2 to 3 ppm. If it does
not, additional dosages of material should be added until it does.
Once the chlorine residual is established in the 2 to 3 ppm range, the
spa or hot tub may be entered.
-
Maintain: Spa 56 Chlorinating Granules should be added daily or as necessary to
maintain 2 to 3 ppm residual chlorine. Frequent checks should be made
of residual chlorine using a reliable test kit. This product should be
broadcast over the surface of the water and allowed at least 5 minutes
mix time before sampling. NOTE: Heavy bather usage or the use of oils
or lotions may increase the chlorine demand of the spa or hot tub
resulting in the need for more frequent checks of chlorine residual.
-
Check pH: pH should be monitored with a reliable test kit and
maintained at 7.2 to 7.8 range for clean sparkling water. pH can be
decreased adding a suitable agent such as sodium bisulfate or
increased by adding a suitable agent such as sodium bicarbonate.
-
Super chlorination: It is good practice to super chlorinate each 2
to 4 weeks. To super chlorinate, add 1 oz. of this product for each
500 gallons of water. Thoroughly clean spa, vacuum and cycle through
filter. Resume program when chlorine residual reads 2 to 3 ppm.
Tips: Shocking the spa after each use will destroy organic
bather waste.
|
|